The Quad QC-24 Pre Amplifier is the perfect choice for the analogue purist, the combination of a good valve amplifier and a good turntable is the closest possible approach to the original recording. There are two options for adding such functionality to our valve pre-amplifiers. A solid-state module is available for the standard Quad QC-24 Pre Amplifier (known as the QC-24 phono stage), which allows direct connection of a turntable with an internal switch to change between moving coil and moving magnet cartridges. This can be fitted as standard or added later.
Please note the phono input is line level until the optional phono stage is added.
Valve Complement – 1x 6111 twin triode
THD @ 1V RMS – <0.2%
Frequency Response – 5Hz – 50kHz (+0dB/-0.5dB)
Hum and Noise – Better than -80dB
Line Stage Gain – 15dBPhono
Recommended Minimum Load – 50 k Ohms
Inputs – 5 × Line level﹡,2 × Buffered tape loops
Power Consumption – 15VA maximum