Rako RNC-070 Wireless Modular Panel

The Rako RNC-070 is a NFC programmable 7-Button wireless modular controller with 4 scenes, off and master raise & lower control for lighting.

The Rako RNC-070 wireless push button control module is programmable via NFC (Near Field Communication) using Rasoft Pro software and Rako’s RAMPI interface. The Rako RNC-070 has the capability for each button to be customised allowing triggers for single or multiple commands. Each input is fully customisable, can be addressed to separate Rako Rooms or Channels and activate on press, or release which gives a ‘Press and Hold’ function.

Wireless keypads are lithium battery powered with battery life calculated as being 3 years, based on pressing a button 30 times a day.

Externally powered versions of the panels are available. Based on the 50 x 50mm Euro module, RNC units are modules only and always require a front plate kit. Panels can either be surface mounted using the pattress, which gives a depth of 14mm, or flush mounted into a standard single gang UK back-box. Rako’s single gang RVF (screw-fixing) front plate kits have surface mount options. Double gang and RLF (screwless) options are for flush mounting only.

Technical Specifications 

Dimensions:

50x50x12mm – flush mount
92x92x14mm – surface mount
Fixing: Flush mounting into standard UK single gang back box, minimum 12mm deep.
Surface mounting on standard single gang UK or European back box or direct to flat surface.
Input Supply: 6V DC – 2x 3V Lithium coin cell
CR2016 (remote power supply version available)
Weight: 100g
Battery Life: Greater than 3 years
Climate Range:

Temperature +2C to +40C
Humidity +5% to 95% non condensing
Standards Emissions: EN61000-6-3 : 2007
Immunity: EN61000-6-1 : 2007
communication Rakom coded fm radio, 433.9MHz
Memory: Flash memory (non volatile)