For a wall of sound that plunges through the big screen, the Krix MX-20 system will provide the impact you’re looking for. With every aspect optimised to deliver the most faithful reproduction of movie soundtracks, from a whisper to the explosion immediately after, these modules provide a true commercial cinema experience at home.

Krix’s MX-20 is designed for cinema rooms four to seven metres long. This system comprises five modules, all of which are the same height and a slim line depth of just 295mm for simple installation into a wall cavity. The front baffle of each module is covered with an acoustic absorbent material to absorb any sound reflecting off the back of the screen or the room itself. This assists greatly with the acoustic treatment of the room to ensure better intelligibility and overall sound performance. Spacer modules with a width of 200mm wide and 325mm wide are available to create the perfect positioning. Price available upon request.

The main speakers feature a 255mm bass-mid driver which has a 50mm voice coil developed to offer low harmonic distortion, especially in the critical midband.

The high frequency drive unit is a damped, high power, 26mm doped fabric dome tweeter, coupled with a proprietary Krix waveguide, for optimum dispersion over the entire working bandwidth. Each subwoofer contains a large 380mm paper cone driver with a 100mm edge-wound copper voice coil, dual spider assembly, and vented magnet assembly.

For the ultimate cinema experience at home, play it through Krix.

Technical Specifications

LCR SPEAKER MODULES:

Frequency Range:
40Hz-20kHz in room response

Power Handling IEC AES:
250 Watts

Power Handling Program:
500 Watts

Sensitivity:
97dB for 2.83 volts at 1 metre

Impedance:
8 Ohms

Configuration:
2-way

Enclosure Type:
Bass reflex, front vented

Low Frequency Driver:
Single 255mm (10”) paper cone driver. 50mm (2”) voice coil wound on high powered kapton former, with ventilated magnet assembly and copper shorting ring for low distortion

High Frequency Driver:
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw waveguide

Input Terminals:
Gold plated spring terminals

Dimensions:
1220mm high x 365mm wide x 295mm deep (2210mm wide including subwoofer modules)

SUBWOOFER MODULES:

Frequency Range:
25Hz-500Hz in room response

Power Handling IEC AES:
700 Watts

Power Handling Program:
1400 Watts

Sensitivity:
100dB for 2.83 volts at 1 metre

Impedance:
8 Ohms

Enclosure Type:
Bass reflex, front vented

Low Frequency Driver:
Single 380mm (15”) paper cone driver. 100mm (4”) edge-wound copper voice coil, dual spider assembly and vented magnet assembly

Input Terminals:
High level gold plated spring terminals

Dimensions:
1220mm high x 550mm wide x 295mm deep (2210mm wide including LCR modules)

SYSTEM RECOMMENDATIONS:

Recommended Room Depth:
4m – 7m

Min. Screen Size 16:9:
100″ (2210mm x 1243mm)

Minimum Screen Size 21:9:
120″ (2806mm x 1184mm)

Brand

Finish

Black

Reviews

There are no reviews yet.

Be the first to review “Krix MX-20 System”