Goldring E2 Moving Magnet Cartridge

The Goldring philosophy is to promote the accurate reproduction of the original recording, maintaining the creative nuances, musicality and rhythm the artist intended you to hear. The E Series is designed to capture this experience when used with all medium to high mass tonearms found on the majority of budget to medium priced turntables. This is achieved through the use of our Magnetic Duplex Technology and Goldring Expert Adjustment.

The Goldring E2 cartridge, the middle in the range, features the same spherical stylus profile as the Goldring E1 but with the additional benefit of an upgraded aluminium cantilever. This is both stiff and light weight allowing the stylus to more accurately trace medium to high frequencies offering more detail and reducing distortion and mis-tracking during loud passages.

Technical Specifications 

Model Variations:
Colour: Green
Cantilever: Aluminium
Stylus profile: Spherical
Stylus radius: 0.6 mil
Transducer Characteristics:
Frequency range: 20 Hz – 20 kHz
Channel balance: 1.5 dB at 1 kHz
Channel separation: >20 dB at 1 kHz
Sensitivity: 3.5 mV (1 kHz @ 5 cm/sec)
Static compliance: 20 mm/N
Vertical tracking angle: 20°
Electrical Characteristics:
Load resistance: 47 kOhm
Load capacitance: 100 – 200 pF
Internal inductance: 400 mH
Internal resistance: 410 Ohm
Mechanical Characteristics:
Cartridge mass: 6.9 g
Fixing centres: 12.7 mm (0.5 in)
Playing weight: 1.5 g – 2.5 g (2.0 g recommended)