Frankly, ATI’s AT6012 amplifier was designed for use in high-performance multi-room systems where performance, accuracy and reliability were requisite. With 60 watts RMS available full-band with all 12-channels driven into 8 ohms loads and 90 watts x 12 available at 4 ohms, and all of the hallmarks that make ATI special; MOH toroidal transformers; double-sided glass-epoxy circuit boards; independent power supplies for each channel; optically coupled protection circuitry; etc., the ATI AT6012 makes a grand statement in a grand home.

At least that was ATI’s thinking until Siegfried Linkwitz, scientist and audiophile (and eternally famous in audio circles for the Linkwitz-Riley crossover), designed his state-of-the-art tri-amplified Orion speaker system and recommended ATI’s AT6012 as its perfect powered accompanist. So ATI changed their thinking. While the ATI AT6012 can be used for high performance, multiroom audio, its quality level is so good it can also be recommended for high performance audiophile speakers. The choice is yours.

Unlike other multi-room amplifiers, the ATI AT6012 is designed to provide up to six rooms of sound with no additional multi-room audio electronics required. Each channel pair of the 6012 has its own high-quality motorized volume control. Add six up/down switches (like the Leviton 5657-2E or other single pole, double-throw, center “off” switches) to achieve independent volume control for each room.

ATI’s AT6012 is the perfect solution for those multi-room sound installations requiring the utmost in flexibility, reliability and audiophile quality sound. This 12-channel, 6-zone power amplifier incorporates the same legendary sound and design criteria as ATI’s other award winning amplifiers-without exception. The ATI AT6012 consists of six 2-channel modules and each zone’s volume (gain) can be remotely adjusted. While elegant in concept and design, ATI’s AT6012 is rugged and will withstand the rigors of even the most demanding requirements. Critical components such as toroidal transformers and circuit boards are manufactured and assembled in ATI’s own factory, guaranteeing consistent quality control. Features including DMC (Detachable Modular Component), Remote-Power-On and ATI’s Isolated Optical Protection Circuit are but a few of the advanced design concepts that add up to make ATI amplifiers the best value in the industry. Circuitry in ATI’s AT6012 is totally complementary from input to output using dual-differential input stages. Pre-drivers then drive the full-complementary output stage.

Technical Specifications 

Number of Channels: 12
EIA 1kHz Output Power at 8Ω*: 75 watts
EIA 1kHz Output Power at 4Ω*: 120 watts
FTC Full Bandwidth Output Power at 8Ω**: 60 watts
FTC Full Bandwidth Output Power at 4Ω**: 90 watts
Input Sensitivity for Full Rated Output: 1.0 volts
Frequency Response: +/-0.1 dB 20-20kHz
Phase Response: +5 to -15 degrees, 20 Hz-20 kHz at 1 watt
Signal-to-Noise Ratio: “A-Weighted” >120 dB
Total Harmonic Distribution: (20 Hz-20 kHz) <0.03%.
Intermodulation Distortions (IMD): <0.03%
Load Impedance Safe with all types of loads: Rated for 4 to 16Ω
Power Bandwidth FTC: +0, -3 dB 5-100 kHz
Damping Factor: >400
Crosstalk: Greater than 100 dB from 20 Hz – 20 kHz
Voltage Gain through RCA Jacks: 28.0 dB
Voltage Gain through XLR Jacks: N/A
Slew Rate: >50V / µSec
Input Impedance: 28 kΩ
DC Output Offset: Less than +/- 5mV
Power Requirements :240VAC***
12 Channel Chassis Dimensions (W x H x D) millimeters 432 x 178 x 407
Net Weight (kg): 33
Shipping Weight (kg): 38

 

Weight 38 kg
Dimensions 407 × 432 × 178 mm
Brand

Finish

Black

Reviews

There are no reviews yet.

Be the first to review “ATI AT6012 12 Channel Power Amplifier”